or to view stock quantity and your pricing.
Steiner serves territories in Northern Illinois, Northwest Indiana and Southern Wisconsin. Please for assistance if outside our sales territory.
689215
SKU689215
MFGR #200202
$/ea
3/8 in shackle anchor screw, 1 ton load capacity, 33 lb weight, pin and body are made of alloy and carbon steel material.
3/8 in shackle anchor screw, 1 ton load capacity, 33 lb weight, pin and body are made of alloy and carbon steel material.
Body Material Carbon Steel Catalog Number 200202 Finish Self Colored Inner Length 1-7/16 in Inner Width 21/32 in (Eyes);1-1/8 in (bow) Load Capacity 1 t Overall Depth 1 in (Eyes) Pin Diameter 7/16 in Pin Material Alloy Steel Pin Type Screw Size 3/8 in Type Shackle Anchor Screw Stock Status NONSTOCK Brand Chicago Hardware Size, working load limit, and trademark are permanently marked on all The Shackles. All The Shackles and pins are heat treated. Loads are based on a design factor of 6 to 1. When tested all The Shackles are pulled at a uniform rate of speed in a direct tension. -Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. -Material traceability available through Product Identification Code (PIC) System
content loaded
content loaded
content loaded
content loaded
- Attributes
- Documents & Resources
- Features
- Substitute Products
| Body Material | Carbon Steel |
| Catalog Number | 200202 |
| Finish | Self Colored |
| Inner Length | 1-7/16 in |
| Inner Width | 21/32 in (Eyes);1-1/8 in (bow) |
| Load Capacity | 1 t |
| Overall Depth | 1 in (Eyes) |
| Pin Diameter | 7/16 in |
| Pin Material | Alloy Steel |
| Pin Type | Screw |
| Size | 3/8 in |
| Type | Shackle Anchor Screw |
| Stock Status | NONSTOCK |
| Brand | Chicago Hardware |
| Size, working load limit, and trademark are permanently marked on all The Shackles. All The Shackles and pins are heat treated. Loads are based on a design factor of 6 to 1. When tested all The Shackles are pulled at a uniform rate of speed in a direct tension. |
| -Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. |
| -Material traceability available through Product Identification Code (PIC) System |